您当前的位置: 首页 - 政务公开 - 2022年沧州市对外招商合作项目发布 - 外资项目目录 - 战略性新兴产业项目

任丘市河北东拓建筑器材有限公司新建焊接及搬运机器人制造项目

发布日期:2022-05-23   来源:

一、项目内容和规模:

项目拟占地面积7公顷,总建筑面积38500平方米。主要建设厂房建筑面积36000平方米,综合办公楼建筑面积5000平方米,员工宿舍及餐厅建筑面积5000平方米,附属用房建筑面积500平方米。

二、投资估算及资金来源:

项目总投资5500万美元,拟利用外资1300万美元。

三、市场分析:

自动生产线和自动化程度高的加工设备已经成为今后制造工厂的一个必然趋势。机器人相对于人的优点就在于它的可编程序性,决定了它终将取代其他一些设备及人员,机器人是以相同的方式完成工作,产品质量十分稳定,并且可以24小时不间断的工作,产品的生产率可以预测,库存量也可以获得较好的控制。产品总价值中每一项费用的节省,都将提高机器人在各种市场上的竞争能力。目前主要销售国内各种生产制造型企业及国外市场,如马来西亚、巴西、埃及、俄罗斯、印度等发展中国家。

四、经济效益分析:

项目建设期约2年,项目建成后年产值约8000万美元,回款周期3-5年。

五、建设条件:

拟建于任丘市经济开发区,区内基础设施完善,交通便利。

六、中方承办单位概况:

河北东拓建筑器材有限公司,成立于2020年1月7日,注册资本2000万元整。唐山贺祥机电股份有限公司成立于1998年,注册资金5340万元,拥有建筑面积11000平米的研发大楼和占地面积53200平米的联合生产车间,是“国家级高新技术企业、国家级守合同重信用企业”和“河北知识产权优势企业、河北省创新型企业、河北省科技型企业、河北省技术创新示范企业”。

七、合作方式:合资、合作。

八、联系方式

单位:河北东拓建筑器材有限公司 张斌(公司法人)

联系电话:18733719999

I. Project Content and Scale:

Covering a planned area of 7 hectares, and a floor area of 38,500 square meters. A workshop with a floor area of 36,000 square meters, a comprehensive office building with a floor area of 5,000 square meters, staff quarters and restaurants with a floor area of 5,000 square meters, and ancillary buildings with a floor area of 500 square meters will be built.

II. Investment Estimation and Sources of Funds:

The total investment of the project is up to USD 55 million, including USD 13 million of foreign investment.

III. Market Analysis:

The procurement and use of automated production lines and highly automated processing equipment has become an inevitable trend for manufacturing plants in the future. Compared with human, the robot is programmable, which is one of reasons why it will eventually replace some equipment and personnel. Robots can produce products with more stable quality when they work in the same way, and they can work 24 hours a day without interruption. Therefore, the productivity can be predicted and the inventory can be well controlled. All cost savings in the total value of products will improve the competitiveness of the robots in various markets. At present, these robots are mainly sold to various domestic manufacturing enterprises and also foreign markets, such as Malaysia, Brazil, Egypt, Russia, India, and other developing countries.

IV. Economic Benefit Analysis:

The construction period of the project is about 2 years. After the completion of the project, its annual income is expected to reach roughly USD 80 million. The payback period is 3-5 years.

V. Construction Conditions:

The project is planned to settle in Renqiu Economic and Technological Development Zone, which enjoys complete infrastructure and convenient transportation.

VI. Overview of Chinese Contractor: 

Hebei Dongtuo Construction Equipment Co., Ltd. was established on January 7, 2020, with a registered capital of RMB 20 million. Tangshan Hexiang Electromechanical Co., Ltd. was established in 1998, with a registered capital of RMB 53.4 million. The company boasts an R&D building with a construction area of 11,000 square meters and a joint production workshop covering an area of 53,200 square meters. It has been rated a "State-level High-tech Enterprise and National Contract-abiding and Credit-worthy Enterprise" and "Enterprise with Intellectual Property Advantage of Hebei Province, Innovative Enterprise of Hebei Province, Scientific and Technological Enterprise of Hebei Province, and Technological Innovation Demonstration Enterprise of Hebei Province".

VII. Cooperation Mode: Joint venture and cooperation.

VIII. Contact Information

Company: Hebei Dongtuo Construction Equipment Co., Ltd., Zhang Bin (Legal Person)

Contact Number: 18733719999